Interlogix NS3550-8T-2S User Manual - Manual (Page 150)

User’s Manual of NS3550-8T-2S
150
Figure 4-8-11: MLD Snooping Configuration Page Screenshot
The page includes the following fields:
Object Description

Snooping Enabled
Enable the Global MLD Snooping.

Unregistered IPMCv6
Flooding Enabled
Enable unregistered IPMCv6 traffic flooding. Please note that disabling
unregistered IPMCv6 traffic flooding may lead to failure of Neighbor Discovery.
 MLD SSM Range SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers
run the SSM service model for the groups in the address range.
 Leave Proxy Enable Enable MLD Leave Proxy. This feature can be used to avoid forwarding
unnecessary leave messages to the router side.
 Proxy Enable Enable MLD Proxy. This feature can be used to avoid forwarding unnecessary
join and leave messages to the router side.
 Router Port Specify which ports act as router ports. A router port is a port on the Ethernet
switch that leads towards the Layer 3 multicast device or MLD querier.
If an aggregation member port is selected as a router port, the whole aggregation
will act as a router port. All means all ports will have one specific setting.
 Fast Leave Enable the fast leave on the port.
 Throtting The Configuration All with available values will assign to whole items.
Enable to limit the number of multicast groups to which a switch port can belong.
All
means all ports will have one specific setting.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.