Interlogix NS3550-8T-2S User Manual - Manual (Page 425)

425
Parameters:
: QCE ID (1-256), default: Next available ID
: Next QCE ID: "next_id (1-256) or 'last'"
: Port List: "port or 'all'", default: All ports
: Frame tag: untag|tag|any
: VID: 1-4095 or 'any', either a specific VID or range of VIDs
: Priority Code Point: specific(0, 1, 2, 3, 4, 5, 6, 7) or
range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'any'
: Drop Eligible Indicator: 0-1 or 'any'
: Source MAC address: (xx-xx-xx) or 'any', 24 MS bits (OUI)
: Destination MAC type: unicast|multicast|broadcast|any
etype : Ethernet Type keyword
: Ethernet Type: 0x600-0xFFFF or 'any' but excluding 0x800(IPv4) and 0x86DD(IPv6)
llc : LLC keyword
: Destination Service Access Point: 0x00-0xFF or 'any'
: Source Service Access Point: 0x00-0xFF or 'any'
: LLC control: 0x00-0xFF or 'any'
snap : SNAP keyword
: Protocol ID (EtherType) or 'any'
ipv4 : IPv4 keyowrd
: IP protocol number: (0-255, TCP or UDP) or 'any'
: Source IP address: (a.b.c.d/n) or 'any'
: DSCP:(0-63,BE,CS1-CS7,EF or AF11-AF43)or'any',specific/range
: IPv4 frame fragmented: yes|no|any
: Source TCP/UDP port:(0-65535) or 'any',specific or port range
: Dest. TCP/UDP port:(0-65535) or 'any', specific or port range
ipv6 : IPv6 keyowrd
: IPv6 source address: (a.b.c.d/n) or 'any', 32 LS bits
: QoS Class: "class (0-7)", default: basic classification
: DP Level: "dp (0-1)", default: basic classification
: DSCP: "dscp (0-63, BE, CS1-CS7, EF or AF11-AF43)"
QoS QCL Delete
Description:
Delete QCE entry from QoS Control list.
Syntax:
QoS QCL Delete
Parameters:
: QCE ID (1-256), default: Next available ID
Default Setting:
disable
Example:
Enable multicast storm control in 2fps
NS3550-8T-2S:/> QoS Storm multicast enable 2
QoS QCL Lookup
Description:
Lookup QoS Control List.
Syntax:
QoS QCL Lookup []
Parameters:
: QCE ID (1-256), default: Next available ID
Default Setting:
disable
Example:
Enable multicast storm control in 2fps