Interlogix NS3550-8T-2S User Manual - Manual (Page 382)

382
Parameters:
: Server response timeout (3-3600 seconds)
(default: Show server timeout configuration)
Default Setting:
15
Example:
Set 30sec for server timeout
NS3550-8T-2S:/>security aaa timeout 30
Security AAA Deadtime
Description:
Set or show server dead time.
Syntax:
Security AAA Deadtime []
Parameters:
: Time that a server is considered dead if it doesn't answer a request (0-3600 seconds)
(default: Show server dead time configuration)
Default Setting:
300
Example:
Set 1000sec for server dead time
NS3550-8T-2S:/>security aaa deadtime 1000
Security AAA RADIUS
Description:
Set or show RADIUS authentication server setup.
Syntax:
Security AAA RADIUS [] [enable|disable] [] [] []
Parameters:
The server index (1-5)
(default: Show RADIUS authentication server configuration)
enable
: Enable RADIUS authentication server
disable : Disable RADIUS authentication server
(default: Show RADIUS server mode)
: IP host address (a.b.c.d) or a host name string
: Secret shared with external authentication server.
To set an empty secret, use two quotes ("").
To use spaces in secret, enquote the secret.
Quotes in the secret are not allowed.
: Server UDP port. Use 0 to use the default RADIUS port (1812)
Example:
Set RADIUS authentication server configuration.
NS3550-8T-2S:/>security aaa radius 1 enable 192.168.0.20 12345678 1812
Security AAA ACCT_RADIUS
Description:
Set or show RADIUS accounting server setup.
Syntax:
Security AAA ACCT_RADIUS [] [enable|disable] [] [] []