Interlogix NS3550-8T-2S User Manual - Manual (Page 362)

User’s Manual of NS3550-8T-2S
362
Security Network Limit Port [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable port security on this port
disable : Disable port security on this port
(default: Show current port enabledness of port security limit control)
Default Setting:
disable
Example:
Enable port limit for port 1
NS3550-8T-2S:/>security network limit port 1 enable
Security Network Limit Limit
Description:
Set or show the max. number of MAC addresses that can be learned on this set of ports.
Syntax:
Security Network Limit Limit [] []
Parameters:
: Port list or 'all', default: All ports
: Max. number of MAC addresses on this port
(default: Show current limit)
Default Setting:
4
Example:
Set limit in 5
NS3550-8T-2S:/>security network limit limit 1-10 5
Security Network Limit Action
Description:
Set or show the action involved with exceeding the limit.
Syntax:
Security Network Limit Action [] [none|trap|shut|trap_shut]
Parameters:
: Port list or 'all', default: All ports
none|trap|shut|trap_shut : Action to be taken in case the number of MAC addresses exceeds the limit
none : Don't do anything
trap : Send an SNMP trap
shut : Shutdown the port
trap_shut : Send an SNMP trap and shutdown the port
(default: Show current action)
Default Setting:
none
Example:
Set trap mode for limit action for port 1
NS3550-8T-2S:/>security network limit action 1 trap
Security Network Limit Reopen
Description: