Security network arp inspection entry, Security network arp inspection status, Security aaa configuration – Interlogix NS3550-8T-2S User Manual User Manual
Page 380
User’s Manual of NS3550-8T-2S
380
disable
: Disable ARP Inspection port
(default: Show ARP Inspection port mode)
Default Setting:
Disable
Example:
Enable the ARP inspection mode of port 1
NS3550-8T-2S:/>security network arp inspection port mode 1
Security Network ARP Inspection Entry
Description:
Add or delete ARP inspection static entry.
Syntax:
Security Network ARP Inspection Entry [
Parameters:
: Port list or 'all', default: All ports
add
: Add new port ARP inspection static entry
delete
: Delete existing port ARP inspection static entry
: VLAN ID (1-4095)
: MAC address (xx-xx-xx-xx-xx-xx), MAC address allowed for doing ARP request
: IP address (a.b.c.d), IP address allowed for doing ARP request
Example:
Add ARP inspection static entry.
NS3550-8T-2S:/>security network arp inspection entry 1 add 1 00-30-4f-00-00-11 192.168.0.11
Security Network ARP Inspection Status
Description:
Show ARP inspection static and dynamic entries.
Syntax:
Security Network ARP Inspection Status [
Parameters:
: Port list or 'all', default: All ports
Example:
Show ARP inspection static and dynamic entries.
NS3550-8T-2S:/>security network arp inspection status
Security AAA Configuration
Description:
Show Auth configuration.
Syntax:
Security AAA Configuration
Example:
Show Auth configuration.
NS3550-8T-2S:/>security aaa configuration
AAA Configuration:
==================