Interlogix NS3550-8T-2S User Manual - Manual (Page 279)

User’s Manual of NS3550-8T-2S
279
: Click to refresh the page immediately.
: Updates the table starting from the first entry in the Alarm Table, i.e. the entry with the lowest ID.
: Updates the table, starting with the entry after the last entry currently displayed.
4.17.4 RMON Event Configuration
Configure RMON Event table on this page. The entry index key is ID; screen in Figure 4-17-4 appears.
Figure 4-17-4: RMON event configuration page screenshot
The page includes the following fields:
Object Description
 Delete Check to delete the entry. It will be deleted during the next save.
 ID Indicates the index of the entry. The range is from 1 to 65535.
 Desc Indicates this event, the string length is from 0 to 127, default is a null string.
 Type Indicates the notification of the event, the possible types are:

none : The total number of octets received on the interface, including framing
characters.

log : The number of uni-cast packets delivered to a higher-layer protocol.

snmptrap : The number of broad-cast and multi-cast packets delivered to a
higher-layer protocol.

logandtrap : The number of inbound packets that are discarded even the
packets are normal.
 Community Specify the community when trap is sent, the string length is from 0 to 127,
default is "public".
 Event Last Time Indicates the value of sysUpTime at the time this event entry last generated an
event.
Buttons
: Click to add a new community entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.