Interlogix NS3550-8T-2S User Manual - Manual (Page 420)

420
Syntax:
QoS Port TagRemarking Map [] [] [] [] []
Parameters:
: Port list or 'all', default: All ports
: QoS class list or 'all', default: All QoS classes (0-7)
: DP level list or 'all', default: All DP levels (0-1)
: Priority Code Point (0-7)
: Drop Eligible Indicator (0-1)
QoS Port DSCP Translation
Description:
Set or show DSCP ingress translation mode.
If translation is enabled for a port, incoming frame DSCP value is translated and translated value is used for QoS
classification.
Syntax:
QoS Port DSCP Translation [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable DSCP ingress translation
disable : Disable DSCP ingress translation
(default: Show DSCP ingress translation mode)
Default Setting:
disable
Example:
Enable DSCP ingress translation on all port.
NS3550-8T-2S:/>qos Port DSCP Translation 1-10 enable