Interlogix NS3550-8T-2S User Manual - Manual (Page 361)

User’s Manual of NS3550-8T-2S
361
Security Network Limit Mode
Description:
Set or show global enabledness.
Syntax:
Security Network Limit Mode [enable|disable]
Parameters:
enable : Globally enable port security
disable : Globally disable port security
(default: Show current global enabledness of port security limit control)
Default Setting:
disable
Example:
Enable the limit mode
NS3550-8T-2S:/>security network limit mode enable
Security Network Limit Aging
Description:
Set or show aging enabledness.
Syntax:
Security Network Limit Aging [enable|disable]
Parameters:
enable : Enable aging
disable : Disable aging
(default: Show current enabledness of aging)
Default Setting:
disable
Example:
Enable limit aging
NS3550-8T-2S:/>security network limit aging enable
Security Network Limit Agetime
Description:
Time in seconds between check for activity on learned MAC addresses.
Syntax:
Security Network Limit Agetime []
Parameters:
: Time in seconds between checks for activity on a MAC address (10-10000000 seconds)
(default: Show current age time)
Default Setting:
3600
Example:
Set age time in 100sec.
NS3550-8T-2S:/>security network limit agetime 100
Security Network Limit Port
Description:
Set or show per-port enabledness.
Syntax: