Interlogix NS3550-8T-2S User Manual - Manual (Page 443)

443
Loop Protect Port Configuration
Description:
Show Loop Protection port configuration.
Syntax:
Loop Protect Port Configuration []
Parameters:
: Port list or 'all', default: All ports
Loop Protect Port Mode
Description:
Set or show the Loop Protection port mode.
Syntax:
Loop Protect Port Mode [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable Loop Protection
disable : Disable Loop Protection
Loop Protect Port Action
Description:
Set or show the Loop Protection port action.
Syntax:
Loop Protect Port Action [] [shutdown|shut_log|log]
Parameters:
: Port list or 'all', default: All ports
shutdown : Shutdown the port
shut_log : Shutdown the port and Log event
log : (Only) Log the event
6.23 IPMC Command
IPMC Configuration
Description:
Show IPMC snooping configuration.
Syntax:
IPMC Configuration [mld|igmp]
Parameters:
mld|igmp:
mld
: IPMC for IPv6 MLD
igmp : IPMC for IPv4 IGMP
IPMC Mode
Description:
Set or show the IPMC snooping mode.
Syntax:
IPMC Mode [mld|igmp] [enable|disable]
Parameters:
mld|igmp:
mld
: IPMC for IPv6 MLD
igmp : IPMC for IPv4 IGMP
enable : Enable IPMC snooping
disable : Disable IPMC snooping
(default: Show global IPMC snooping mode)