Interlogix NS3550-8T-2S User Manual - Manual (Page 275)

User’s Manual of NS3550-8T-2S
275
 Tx Mode Controls whether or not the port is actively generating loop protection PDU's, or
whether or not it is just passively looking for looped PDU's.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.16.2 Status
This page displays the loop protection port status the ports from the Industrial Managed Switch.
Figure 4-16-2: Loop Protection Status Page Screenshot
The page includes the following fields:
Object Description

Port
The switch port number of the logical port.

Action
The currently configured port action.
 Transmit The currently configured port transmit mode.
 Loops The number of loops detected on this port.
 Status The current loop protection status of the port.
 Loop Whether a loop is currently detected on the port.
 Time of Last Loop The time of the last loop event detected.