Interlogix NS3550-8T-2S User Manual - Manual (Page 402)

User’s Manual of NS3550-8T-2S
402
port_descr : Description of the port
sysm_name : System name
sys_descr : Description of the system
sys_capa : System capabilities
mgmt_addr : Master's IP address
(default: Show optional TLV's configuration)
enable
: Enables TLV
disable : Disable TLV
(default: Show optional TLV's configuration)
Default Setting:
Description of the port: Enable
System name: Enable
Description of the system: Enable
System capabilities: Enable
Master's IP address: Enable
Example:
Disable description of the port for port1
NS3550-8T-2S:/>lldp optional_tlv 1 port_descr disable
LLDP Interval
Description:
Set or show LLDP Tx interval.
Syntax:
LLDP Interval []
Parameters:
: LLDP transmission interval (5-32768)
Default Setting:
30
Example:
Set transmission interval in 10
NS3550-8T-2S:/>lldp interval 10
LLDP Hold
Description:
Set or show LLDP Tx hold value.
Syntax:
LLDP Hold []
Parameters:
: LLDP hold value (2-10)
Default Setting:
3
Example:
Set LLDP hold value in 10
NS3550-8T-2S:/>lldp hold 10
LLDP Delay
Description:
Set or show LLDP Tx delay.