Interlogix NS3550-8T-2S User Manual - Manual (Page 319)

User’s Manual of NS3550-8T-2S
319
6.3 Port Management Command
Port Configuration
Description:
Show port configuration.
Syntax:
Port Configuration [] [up|down]
Parameters:
: Port list or 'all', default: All ports
up : Show ports, which are up
down : Show ports, which are down
(default: Show all ports)
Example:
Display port1~4 status
NS3550-8T-2S:/>port configuration 1-4
Port Configuration:
===================
Port State Mode Flow Control MaxFrame Power Excessive Link
---- -------- ------ ------------ -------- -------- --------- ----
1 Enabled Auto Disabled 9600 Disabled Discard Down
2 Enabled Auto Disabled 9600 Disabled Discard Down
3 Enabled Auto Disabled 9600 Disabled Discard Down
4 Enabled Auto Disabled 9600 Disabled Discard Down
Port Mode
Description:
Set or show the port speed and duplex mode.
Syntax:
Port Mode [] [auto|10hdx|10fdx|100hdx|100fdx|1000fdx]
Parameters:
: Port list or 'all', default: All ports
auto : Auto negotiation of speed and duplex
10hdx : 10 Mbps, half duplex
10fdx : 10 Mbps, full duplex
100hdx : 100 Mbps, half duplex
100fdx : 100 Mbps, full duplex
1000fdx : 1 Gbps, full duplex
(default: Show configured and current mode)
Default Setting:
Auto
Example:
Set 10Mbps (half duplex) speed for port1
NS3550-8T-2S:/>port mode 1 10hdx
Port Flow Control
Description:
Set or show the port flow control mode.
Syntax:
Port Flow Control [] [enable|disable]