Interlogix NS3550-8T-2S User Manual - Manual (Page 189)

189
 MAC Parameters
Object Description

SMAC Filter
(Only displayed when the frame type is Ethernet Type or ARP.)
Specify the source MAC filter for this ACE.
Any
: No SMAC filter is specified. (SMAC filter status is "don't-care".)
Specific : If you want to filter a specific source MAC address with this ACE, choose this
value. A field for entering an SMAC value appears.

SMAC Value
When "Specific" is selected for the SMAC filter, you can enter a specific source MAC
address. The legal format is "xx-xx-xx-xx-xx-xx". A frame that hits this ACE matches
this SMAC value.

DMAC Filter Specify the destination MAC filter for this ACE.
Any
: No DMAC filter is specified. (DMAC filter status is "don't-care".)
MC : Frame must be multicast.
BC : Frame must be broadcast.
UC : Frame must be unicast.
Specific : If you want to filter a specific destination MAC address with this ACE, choose
this value. A field for entering a DMAC value appears.

DMAC Value
When "Specific" is selected for the DMAC filter, you can enter a specific destination
MAC address. The legal format is "xx-xx-xx-xx-xx-xx". A frame that hits this ACE
matches this DMAC value.
 VLAN Parameters
Object Description
 802.1Q Tagged Specify whether frames can hit the action according to the 802.1Q tagged. The
allowed values are:
Any
: Any value is allowed ("don't-care").
Enabled : Tagged frame only.
Disabled : Untagged frame only.
The default value is "Any".

VLAN ID Filter Specify the VLAN ID filter for this ACE.
Any
: No VLAN ID filter is specified. (VLAN ID filter status is "don't-care".)
Specific : If you want to filter a specific VLAN ID with this ACE, choose this value.
A field for entering a VLAN ID number appears.

VLAN ID
When "Specific" is selected for the VLAN ID filter, you can enter a specific VLAN
ID number. The allowed range is 1 to 4095. A frame that hits this ACE matches
this VLAN ID value.

Tag Priority Specify the tag priority for this ACE. A frame that hits this ACE matches this tag
priority. The allowed number range is 0 to 7. The value Any means that no tag
priority is specified (tag priority is "don't-care".)
 ARP Parameters
The ARP parameters can be configured when Frame Type "ARP" is selected.
Object Description

ARP/RARP Specify the available ARP/RARP opcode (OP) flag for this ACE.
Any
: No ARP/RARP OP flag is specified. (OP is "don't-care".)
ARP : Frame must have ARP/RARP opcode set to ARP.
RARP : Frame must have ARP/RARP opcode set to RARP.
Other : Frame has unknown ARP/RARP Opcode flag.

Request/Reply
Specify the available ARP/RARP opcode (OP) flag for this ACE.
Any
: No ARP/RARP OP flag is specified. (OP is "don't-care".)
Request : Frame must have ARP Request or RARP Request OP flag set.
Reply : Frame must have ARP Reply or RARP Reply OP flag.

Sender IP Filter Specify the sender IP filter for this ACE.
Any
: No sender IP filter is specified. (Sender IP filter is "don't-care".)
Host : Sender IP filter is set to Host. Specify the sender IP address in the SIP
Address field that appears.
Network
: Sender IP filter is set to Network. Specify the sender IP address and
sender IP mask in the SIP Address and SIP Mask fields that appear.

Sender IP Address When "Host" or "Network" is selected for the sender IP filter, you can enter a
specific sender IP address in dotted decimal notation.

Sender IP Mask When "Network" is selected for the sender IP filter, you can enter a specific
sender IP mask in dotted decimal notation.
 Target IP Filter Specify the target IP filter for this specific ACE.
Any
: No target IP filter is specified. (Target IP filter is "don't-care".)
Host : Target IP filter is set to Host. Specify the target IP address in the Target IP