Interlogix NS3550-8T-2S User Manual - Manual (Page 372)

User’s Manual of NS3550-8T-2S
372
Example:
Delete ACE 1
NS3550-8T-2S:/>security network acl delete 1
Security Network ACL Lookup
Description:
Show ACE, default: All ACEs.
Syntax:
Security Network ACL Lookup []
Parameters:
: ACE ID (1-256)
Example:
Lookup ACE 1
NS3550-8T-2S:/>security network acl lookup 1
Security Network ACL Clear
Description:
Clear all ACL counters.
Syntax:
Security Network ACL Clear
Example:
Clear all ACL counters.
NS3550-8T-2S:/>security network acl clear
Security Network ACL Status
Description:
Show ACL status.
Syntax:
Security Network ACL Status [combined|static|dhcp|upnp|arp_inspection|ipmc|ip_source_guard|conflicts]
Parameters:
combined : Shows the combined status
static : Shows the static user configured status
dhcp : Shows the status by DHCP
upnp : Shows the status by UPnP
arp_inspection : Shows the status by ARP Inspection
ip_source_guard : Shows the status by IP Source Guard
conflicts : Shows all conflict status
(default : Shows the combined status)
Example:
Show ACL status.
NS3550-8T-2S:/>security network acl status
Security Network DHCP Relay Configuration
Description:
Show DHCP relay configuration.
Syntax:
Security Network DHCP Relay Configuration