7 radius overview – Interlogix NS3550-8T-2S User Manual User Manual
Page 216

User’s Manual of NS3550-8T-2S
216
4.11.7 RADIUS Overview
This page provides an overview of the status of the RADIUS servers configurable on the Authentication configuration page. The
RADIUS Authentication/Accounting Server Overview screen in
Figure 4-11-8
appears.
Figure 4-11-8:
RADIUS Authentication/Accounting Server Overview Page Screenshot
The page includes the following fields:
RADIUS Authentication Server
Object
Description
#
The RADIUS server number. Click to navigate to detailed statistics for this server.
IP Address
The IP address and UDP port number (in
this server.
Status
The current state of the server. This field takes one of the following values:
Disabled
: The server is disabled.
Not Ready
: The server is enabled, but IP communication is not yet up
and running.
Ready
: The server is enabled, IP communication is up and running,
and the RADIUS module is ready to accept access attempts.
Dead (X seconds left)
: Access attempts were made to this server, but
it did not reply within the configured timeout. The server has
temporarily been disabled, but will get re-enabled when the dead-time
expires. The number of seconds left before this occurs is displayed in
parentheses. This state is only reachable when more than one server
is enabled.
RADIUS Accounting Server
Object
Description
#
The RADIUS server number. Click to navigate to detailed statistics for this server.
IP Address
The IP address and UDP port number (in
this server.
Status
The current state of the server. This field takes one of the following values:
Disabled
: The server is disabled.
Not Ready
: The server is enabled, but IP communication is not yet up
and running.
Ready
: The server is enabled, IP communication is up and running,