Interlogix NS3550-8T-2S User Manual - Manual (Page 410)

410
6.14 Thermal Command
Thermal Priority Temperature
Description:
Set or show the temperature at which the ports shall be shut down.
Syntax:
Thermal prio_temp [] []
Parameters:
: List of priorities (0-3)
: Temperature at which ports shall be shut down (0-255 degree C)
Example:
Show thermal priority temperature.
NS3550-8T-2S:/> Thermal prio_temp
Priority Temp.
--------- -----
0 255 C
1 255 C
2 255 C
3 255 C
Thermal Port Priority
Description:
Set or show the ports priority.
Syntax:
Thermal port_prio [] []
Parameters:
: Port list or 'all', default: All ports
: Priority (0-3)
Default Setting:
0
Example:
Set thermal port priority in 2
NS3550-8T-2S:/> Thermal port_prio 2
Thermal Status
Description:
Shows the chip temperature.
Syntax:
Thermal status
Example:
Shows the chip temperature.
NS3550-8T-2S:/> Thermal status
Port Chip Temp.
---- ----------
1 47 C
2 47 C
3 47 C
4 47 C
5 47 C
6 47 C
7 47 C