Interlogix NS3550-8T-2S User Manual - Manual (Page 373)

User’s Manual of NS3550-8T-2S
373
Example:
Show DHCP relay configuration.
NS3550-8T-2S:/>security network dhcp relay configuration
DHCP Relay Configuration:
=========================
DHCP Relay Mode : Disabled
DHCP Relay Server : NULL
DHCP Relay Information Mode : Disabled
DHCP Relay Information Policy : replace
Security Network DHCP Relay Mode
Description:
Set or show the DHCP relay mode.
Syntax:
Security Network DHCP Relay Mode [enable|disable]
Parameters:
enable : Enable DHCP relaly mode.
When enable DHCP relay mode operation, the agent forward and to transfer DHCP messages between the
clients and the server when they are not on the same subnet domain. And the DHCP broadcast message won't
flood for security considered.
disable : Disable DHCP relaly mode
(default: Show flow DHCP relaly mode)
Default Setting:
disable
Example:
Enable DHCP relay mode
NS3550-8T-2S:/>security network dhcp relay mode enable
Security Network DHCP Relay Server
Description:
Show or set DHCP relay server.
Syntax:
Security Network DHCP Relay Server []
Parameters:
: IP address (a.b.c.d), default: Show IP address
Default Setting:
null
Example:
Set DHCP relay server in 192.168.0.20
NS3550-8T-2S:/>security network dhcp relay server 192.168.0.20
Security Network DHCP Relay Information Mode
Description:
Set or show DHCP relay agent information option mode.
When enable DHCP relay information mode operation, the agent insert specific information (option 82) into a DHCP
message when forwarding to DHCP server and remote it from a DHCP message when transferring to DHCP client. It only
works under DHCP relay operation mode enabled.
Syntax:
Security Network DHCP Relay Information Mode [enable|disable]