Interlogix NS3550-8T-2S User Manual - Manual (Page 364)

User’s Manual of NS3550-8T-2S
364
NS3550-8T-2S:/>security network nas mode enable
Security Network NAS State
Description:
Set or show the port security state.
Syntax:
Security Network NAS State [] [auto|authorized|unauthorized|single|multi|macbased]
Parameters:
: Port list or 'all', default: All ports
auto : Port-based 802.1X Authentication
authorized : Port access is allowed
unauthorized : Port access is not allowed
single : Single Host 802.1X Authentication
multi : Multiple Host 802.1X Authentication
macbased : Switch authenticates on behalf of the client
(default: Show 802.1X state)
Default Setting:
none
Example:
Show the port 1 security state.
NS3550-8T-2S:/>security network nas state 1
Port Admin State Port State Last Source Last ID
---- ------------------ --------------------- ----------------- ------------------
1 Force Authorized Globally Disabled - -
Security Network NAS Reauthentication
Description:
Set or show Reauthentication enabledness.
Syntax:
Security Network NAS Reauthentication [enable|disable]
Parameters:
enable : Enable reauthentication
disable : Disable reauthentication
(default: Show current reauthentication mode)
Default Setting:
disable
Example:
Enable reauthentication function.
NS3550-8T-2S:/>security network nas reauthentication enable
Security Network NAS ReauthPeriod
Description:
Set or show either global enabledness (use the global keyword) or per-port enabledness of RADIUS-assigned VLAN.
Syntax:
Security Network NAS RADIUS_VLAN [global|] [enable|disable]
Parameters:
global : Select the global RADIUS-assigned VLAN setting
: Select the per-port RADIUS-assigned VLAN setting
(default: Show current per-port RADIUS-assigned VLAN enabledness)
enable
: Enable RADIUS-assigned VLAN either globally or on one or more ports