Interlogix NS3550-8T-2S User Manual User Manual

Page 2

User’s Manual of NS3550-8T-2S

Copyright

© 2014 United Technologies Corporation
Interlogix is part of UTC Building & Industrial Systems, a unit of United
Technologies Corporation. All rights reserved.

Trademarks and

patents

The IFS NS3550-8T-2S name and logo are trademarks of United
Technologies.
Other trade names used in this document may be trademarks or registered
trademarks of the manufacturers or vendors of the respective products.

Manufacturer

UTC Building & Industrial Systems, Inc.
2955 Red Hill Avenue
Costa Mesa, CA 92626-5923, USA
Authorized EU manufacturing representative:
UTC Climate Controls & Security B.V.,
Kelvinstraat 7, 6003 DH Weert, Netherlands

Intended use

Use this product only for the purpose it was designed for; refer to the data
sheet and user documentation for details. For the latest product information,
contact your local supplier or visit us online at www.interlogix.com.

Certification

N4131

FCC compliance

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
You are cautioned that any changes or modifications not expressly
approved by the party responsible for compliance could void the user's
authority to operate the equipment.

ACMA compliance

Notice!

This is a Class A product. In a domestic environment this product

may cause radio interference in which case the user may be required to take
adequate measures.

Canada

This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme á la norme NMB-003du
Canada.

European Union

directives

2004/108/EC (EMC Directive):

Hereby,

UTC Building & Industrial Systems,

Inc.

declares that this device is in compliance with the essential

requirements and other relevant provisions of Directive 2004/108/EC.

Contact Information

For contact information, see