Interlogix NS3550-8T-2S User Manual - Manual (Page 456)

User’s Manual of NS3550-8T-2S
456
6.26 Ethernet Virtual Connections Command
EVC Configuration
Description:
Show EVC configuration.
Syntax:
EVC Configuration [] []
Parameters:
: Port list or 'all', default: All ports
: Policer ID (1-128)
EVC Port DEI
Description:
Set or show port DEI mode.
Syntax:
EVC Port DEI [] []
Parameters:
: Port list or 'all', default: All ports
: DEI mode: coloured|fixed
EVC Port Tag
Description:
Set or show port tag match mode.
Syntax:
EVC Port Tag [] []
Parameters:
: Port list or 'all', default: All ports
: Tag mode: inner|outer
EVC Port Addr
Description:
Set or show port address match mode.
Syntax:
EVC Port Addr [] []
Parameters:
: Port list or 'all', default: All ports
: IP/MAC address mode: source|destination
EVC Port L2CP
Description:
Set or show port L2CP mode
Syntax:
EVC Port L2CP [] [] []
Parameters:
: Port list or 'all', default: All ports
: L2CP ID list (0-31). BPDU range: 0-15, GARP range: 16-31
: The mode takes the following values:
normal : Default forwarding
forward : Forward
redirect : Redirect to CPU