Interlogix NS3550-8T-2S User Manual - Manual (Page 458)

User’s Manual of NS3550-8T-2S
458
EVC Status
Description:
Show EVC Status.
Syntax:
EVC Status []
Parameters:
: EVC ID (1-128)
EVC Statistics
Description:
Show or clear EVC statistics.
Syntax:
EVC Statistics [] [] []
Parameters:
: Port list or 'all', default: All ports
: QoS class list, 0-7
: Statistics command: clear|green|yellow|red|discard
EVC ECE Add
Description:
Add or modify EVC Control Entry (ECE):
- If is specified and the ECE exists, the ECE will be modified.
- If is omitted or the ECE does not exist, a new ECE will be added.
- If is specified, the ECE will be placed before this entry.
- If is 'last', the ECE will be placed at the end of the list.
- If is omitted and it is a new ECE, the ECE will be placed last.
- If is omitted and the ECE exists, the ECE will not be moved.
Syntax:
EVC ECE Add [] [] [uni] [] [] [][tag] [] [] []
[] [all | (ipv4 [] [] [] [] [] []) | (ipv6 [] [] []
[] [])] [direction] [] [evc] [] [pop] [] [policy] [] [class] [] [outer]
[] [] [] []
Parameters:
: ECE ID (1-128)
: Next ECE ID (1-128) or 'last'
uni : UNI keyword
: UNI port list (1-10)
: DMAC type: any|unicast|multicast|broadcast
: SMAC or 'any'
tag : Tag matching keyword
: Tag type: tagged|untagged|any
: VLAN ID value/range (0-4095) or 'any'
: PCP value/range (0-7) or 'any'
: DEI value, 0, 1 or 'any'
all : Keyword for matching any frame type
ipv4 : Keyword for matching IPv4 frames
: IP protocol value (0-255) or 'any'
: IPv4 source address (a.b.c.d/n) or 'any'
: DSCP value/range (0-63) or 'any'
: IPv4 fragment: any|fragment|non-fragment
: UDP/TCP source port value/range (0-65535) or 'any'
: UDP/TCP destination port value/range (0-65535) or 'any'
ipv6 : Keyword for matching IPv6 frames
: IPv6 source address (a.b.c.d/n) or 'any'
direction : Direction keyword
: ECE direction: both|uni-to-nni|nni-to-uni