Interlogix NS3550-8T-2S User Manual - Manual (Page 463)

User’s Manual of NS3550-8T-2S
463
'cflow' is the client flow instance - up to 10 possible client flows (EVC).
Syntax:
MEP client config [] [domport|domevc] [] [] [] [] [] [] [] []
[] [] []
Parameters:
: Instance number
domport|domevc : Flow domain
: MEP level (0-7)
: Client flow instance number (EVC)
MEP AIS Configuration
Description:
MEP AIS configuration
'prio' is the priority (PCP) of transmitted AIS frame
'1s|1m' is the number of AIS frame pr. second
'set|clear' is set or clear of protection usability. If set, the first 3 AIS frames are transmitted as fast as possible - this gives
protection reliability in the path end-point.
Syntax:
MEP ais config [] [] [1s|1m] [set|clear] [enable|disable]
Parameters:
: Instance number
: OAM PDU priority
1s|1m : Transmit period for AIS
1s - to send OAM Frames in the rate of 1 per second
1m - to send OAM frames in the rate of 1 per minute
set|clear
: Protection usability set/clear
enable|disable : enable/disable
MEP LCK Configuration
Description:
MEP LCK configuration
'prio' is the priority (PCP) of transmitted AIS frame
'1s|1m' is the number of AIS frame pr. second.
Syntax:
MEP lck config [] [] [1s|1m] [enable|disable]
Parameters:
: Instance number
: OAM PDU priority
1s|1m : Transmit period for LCK
1s - to send OAM Frames in the rate of 1 per second
1m - to send OAM frames in the rate of 1 per minute
enable|disable
: enable/disable
MEP Link Trace Configuration
Description:
MEP Link Trace configuration
'prio' is the priority (PCP) of transmitted LTM frame
'mac_addr' is the unicast MAC of target MEP/MIP
'mep' is the peer MEP-ID of target MEP - only used if 'mac_addr is 'all zero'
'tll' is the TLL in the transmitted LTM.
Syntax:
MEP lt config [] [] [] [] [] [enable|disable]
Parameters:
: Instance number
: OAM PDU priority