Interlogix NS3550-8T-2S User Manual - Manual (Page 442)

442
Parameters:
enable : Enable Loop Protection
disable : Disable Loop Protection
Default Setting:
enable
Loop Protect Transmit
Description:
Set or show the Loop Protection transmit interval.
Syntax:
Loop Protect Transmit []
Parameters:
Transmit time interval (1-10 seconds)
Default Setting:
5
Loop Protect Shutdown
Description:
Set or show the Loop Protection shutdown time.
Syntax:
Loop Protect Shutdown []
Parameters:
Shutdown time interval (0-604800 seconds)
A value of zero disables re-enabling the port
Default Setting:
10