Interlogix NS3550-8T-2S User Manual User Manual
Page 50

User’s Manual of NS3550-8T-2S
50
The page includes the following fields:
Object
Description
User Name
The name identifies the user.
Privilege Level
The privilege level of the user. The allowed range is 1 to 15. If the privilege level
value is 15, it can access all groups, i.e. granted the full control of the device. But
others value need to refer to each group privilege level. User's privilege should
be the same or greater than the group privilege level to have the access to that
group. By default setting, almost group privilege level 5 has the read-only access
and privilege level 10 has the read-write access. And the system maintenance
(software upload, factory defaults, etc.) needs user privilege level 15. Generally,
the privilege level 15 can be used for an administrator account, privilege level 10
for a standard user account and privilege level 5 for a guest account.
Buttons
: Click to add a new user.
Add / Edit User
This page configures a user – add, edit or delete user.
Figure 4-2-5:
Add / Edit User Configuration Page Screenshot
The page includes the following fields:
Object
Description
User Name
A string identifies the user name whose entry should belong to. The allowed
string length is 1 to 32. The valid user name is a combination of letters, numbers
and underscores.
Password
The password of the user. The allowed string length is 0 to 32.
Privilege Level
The privilege level of the user. The allowed range is 1 to 15. If the privilege level
value is 15, it can access all groups, i.e. granted the full control of the device. But
others value need to refer to each group privilege level. User's privilege should
be same or greater than the group privilege level to have the access to that
group. By default setting, most groups privilege level 5 has the read-only access
and privilege level 10 has the read-write access. And the system maintenance
(software upload, factory defaults and etc.) need user privilege level 15.
Generally, the privilege level 15 can be used for an administrator account,
privilege level 10 for a standard user account and privilege level 5 for a guest
account.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the Users.
: Delete the current user. This button is not available for new configurations (Add new user)