Interlogix NS3550-8T-2S User Manual - Manual (Page 370)

370
Parameters:
: Port list or 'all', default: All ports
permit : Permit forwarding (default)
deny : Deny forwarding
: Rate limiter number (1-15) or 'disable'
: Port number for copy of frames or 'disable'
: System logging of frames: log|log_disable
: Shut down ingress port: shut|shut_disable
Example:
Show ACL action in port 1
NS3550-8T-2S:/>security network acl action 1
Port Action Rate Limiter Port Copy Mirror Logging Shutdown Counter
---- ------ ------------ --------- -------- -------- -------- -------
1 Permit Disabled Disabled Disabled Disabled Disabled 0
Security Network ACL Policy
Description:
Set or show the ACL port policy.
Syntax:
Security Network ACL Policy [] []
Parameters:
: Port list or 'all', default: All ports
: Policy number (1-8)
Default Setting:
1
Example:
Set ACL policy 2 for port 1
NS3550-8T-2S:/>security network acl policy 1 2
Security Network ACL Rate
Description:
Set or show the ACL rate limiter.
Syntax:
Security Network ACL Rate [] [] []
Parameters:
: Rate limiter list (1-16), default: All rate limiters
: IP flags: pps|kbps, default: pss
: Rate in pps (0-100) or kbps (0, 100, 2*100, 3*100, ..., 1000000)
Default Setting:
1
Example:
Set rate limit value in 100 for port 1
NS3550-8T-2S:/>security network acl rate 1 100
Security Network ACL Add
Description:
Add or modify Access Control Entry (ACE).