Interlogix NS3550-8T-2S User Manual - Manual (Page 430)

430
6.18 Firmware Command
Firmware Load
Description:
Load new firmware from TFTP server.
Syntax:
Firmware Load
Parameters:
: IP host address (a.b.c.d) or a host name string
: Firmware file name
Firmware IPv6 Load
Description:
Load new firmware from IPv6 TFTP server.
Syntax:
Firmware IPv6 Load
Parameters:
: TFTP server IPv6 address
: Firmware file name
Firmware Information
Description:
Display information about active and alternate firmware images.
Syntax:
Firmware Information
Firmware Swap
Description:
Activate the alternate firmware image..
Syntax:
Firmware Swap
6.19 UPnP Command
UPnP Configuration
Description:
Show UPnP configuration.
Syntax:
UPnP Configuration
Example:
Show UPnP configuration.
NS3550-8T-2S:/>upnp configuration
UPnP Configuration:
===================
UPnP Mode : Disabled
UPnP TTL : 4
UPnP Advertising Duration : 100