Interlogix NS3550-8T-2S User Manual - Manual (Page 461)

User’s Manual of NS3550-8T-2S
461
Get protection state.
Syntax:
EPS state []
Parameters:
: Instance number
6.28 Maintainence entity End Point Command
MEP Config
Description:
MEP instance configuration
'mep|mip' this entity is either a MEP or a MIP - end point or intermediate point
'ingress|egress' this entity is either a Ingress (down) or Egress (up) type of MEP/MIP
'domport|domevc' the domain is either Port or EVC
'level' is the MEG level
'port' is the residence port
'flow' is the related flow instance number - Port number in Port domain - EVC number in EVC domain
'vid' is used for TAGGED OAM in port domain
'itu|ieee' is the MEG ID format
'meg' is the MEG ID - max. 8 char in case of 'ieee' - 6 or 7 char in case of 'itu'
'mep' is the MEP ID.
Syntax:
MEP config [] [mep|mip] [ingress|egress] [] [domport|domevc] [] [itu|ieee] [] [] []
[] [enable|disable]
Parameters:
: Instance number
mep|mip : Mode of the MEP instance
ingress|egress : Direction of the MEP instance
: Port number.
domport|domevc : Flow domain
: MEP level (0-7)
itu|ieee : MEG format
ITU : ICC format as defined in Y.1731 ANNEX A
IEEE : String format Domain Name and Short Name as defined in 802.1ag
: MEG ID (max. 8 chars)
: This MEP id (0-0x1FFF)
: C-TAG only applicable for Port MEP
: Flow instance number (Port/EVC)
enable|disable : enable/disable
MEP Peer MEP
Description:
MEP Peer MEP id configuration.
Syntax:
MEP peer MEP [] [] [] [enable|disable]
Parameters:
: Instance number
: This MEP id (0-0x1FFF)
: MAC address ('xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx', x is a hexadecimal digit)
enable|disable : enable/disable