Snmp trap link-status – Allied Telesis AT-9000 Series User Manual

Page 996

Text mode
Original mode

Chapter 63: SNMPv1 and SNMPv2c Commands

968

SNMP TRAP LINK-STATUS

Syntax

snmp trap link-status

Parameters

None

Mode

Port Interface mode

Description

Use this command to enable SNMP to transmit link status notifications
(traps) when ports establish links (linkUp) or lose links (linkDown) to
network devices.

Confirmation Command

“SHOW INTERFACE” on page 193

Example

This example configures the switch to transmit link status notifications
whenever links are established or lost on ports 1 to 4:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.1-port1.0.4
awplus(config-if)# snmp trap link-status