Allied Telesis AT-9000 Series - Manual (Page 1385)

AT-9000 Switch Command Line User’s Guide
1357
NO SERVICE HTTPS
Syntax
no service https
Parameters
None
Mode
Global Configuration mode
Description
Use this command to disable the secure HTTPS web server on the switch.
The switch rejects secure HTTPS web browser management sessions
when the server is deactivated. You might disable the server to prevent
remote web browser management sessions of the switch or prior to
activating the non-secure HTTP web browser server.
Confirmation Command
“SHOW IP HTTPS” on page 1359
Example
awplus> enable
awplus# configure terminal
awplus(config)# no service https