Allied Telesis AT-9000 Series - Manual (Page 954)

Chapter 61: 802.1x Port-based Network Access Control Commands
926
SHOW AUTH-MAC SUPPLICANT INTERFACE
Syntax
show auth-mac supplicant interface port
Parameters
port
Specifies a port. You can enter more than one port.
Mode
Privileged Exec mode
Description
Use this command to display the number and types of supplicants on the
authenticator ports. This command is equivalent to “SHOW DOT1X
SUPPLICANT INTERFACE Command” on page 930. An example is
shown in Figure 161.
Figure 161. SHOW AUTH-MAC SUPPLICANT INTERFACE Command
Example
This example displays the number and types of supplicants on
authenticator ports 21 and 23:
awplus# show auth-mac supplicant interface port1.0.21-
port1.0.23
Interface port1.0.3
authenticationMethod: dot1x
totalSupplicantNum: 0
authorizedSupplicantNum: 0
macBasedAuthenticationSupplicantNum: 0
dot1xAuthenticationSupplicantNum: 0
webBasedAuthenticationSupplicantNum: 0
otherAuthenticationSupplicantNum: 0
No supplicants