beautypg.com

Storm-control – Allied Telesis AT-9000 Series User Manual

Page 241

background image

AT-9000 Switch Command Line User’s Guide

213

STORM-CONTROL

Syntax

storm-control broadcast|multicast|dlf level

value

Parameters

broadcast

Specifies broadcast packets.

multicast

Specifies multicast packets.

dlf

Specifies unknown unicast packets.

level

Specifies the maximum number of ingress packets per second of
the designated type the port will forward. The range is 0 to
33,554,431 packets.

Mode

Port Interface mode

Description

Use this command to set maximum thresholds for the ingress packets on
the ports. Ingress packets that exceed the thresholds are discarded by the
ports. Thresholds can be set independently for broadcast packets,
multicast packets, and unknown unicast packets. To view the current
thresholds of the ports, refer to “SHOW RUNNING-CONFIG” on page 130.

To remove threshold levels from the ports, refer to “NO STORM-
CONTROL” on page 185.

Confirmation Commands

“SHOW STORM-CONTROL” on page 205

“SHOW RUNNING-CONFIG” on page 130