Allied Telesis AT-9000 Series - Manual (Page 163)

AT-9000 Switch Command Line User’s Guide
135
SHOW USERS
Syntax
show users
Parameters
None
Modes
Privileged Exec mode
Description
Use this command to display the managers who are currently managing
the switch locally through the Console port and remotely from Telnet and
SSH sessions. This command does not display managers who are
configuring the device with a web browser application or an SNMP
application. Figure 40 displays an example of the information.
Figure 40. SHOW USERS Command
The columns are described in Table 9.
Table 10. SHOW USERS Command
Parameter Description
Line The active management sessions. The
possible designators are “con0” for a local
management session and “vty” for remote
Telnet and SSH sessions.
User The login user name of the manager
account.
Host(s) This field is not applicable to the switch.
LineUserHost(s)IdleLocation
con0manageridle00:00:00ttyS0
vty0Brandonidle00:03:11149.112.167.29