beautypg.com

Figure 168: show running-config snmp command – Allied Telesis AT-9000 Series User Manual

Page 971

background image

AT-9000 Switch Command Line User’s Guide

943

To view the trap and inform receivers assigned to the community strings,
use the SHOW RUNNING-CONFIG SNMP command in the Privileged
Exec mode:

awplus# show running-config snmp

Here is an example of command display:

Figure 168. SHOW RUNNING-CONFIG SNMP Command

snmp-server
no snmp-server enable trap auth
snmp-server community sw12eng1 rw
snmp-server community sw12eng1limit rw
snmp-server community westplnm7 ro
snmp-server community site12pl4 ro
snmp-server host 149.198.74.143 traps version 2c sw12eng1
snmp-server host 149.198.74.154 traps version 2c sw12eng1
snmp-server host 149.198.121.17 traps version 2c sw12eng1limit
snmp-server host 149.198.121.198 traps version 2c sw12eng1limit

See also other documents in the category Allied Telesis Computer hardware: