Allied Telesis AT-9000 Series - Manual (Page 99)

AT-9000 Switch Command Line User’s Guide
71
WRITE
Syntax
write
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to update the active boot configuration file with the
switch’s current configuration, for permanent storage. When you enter the
command, the switch copies its parameter settings into the active boot
configuration file. The switch saves only those parameters that are not at
their default settings.
Note
Parameter changes that are not saved in the active boot
configuration file are discarded when the switch is powered off or
reset.
To view the name of the active boot configuration file, see “SHOW BOOT”
on page 456.
This command is equivalent to “COPY RUNNING-CONFIG STARTUP-
CONFIG” on page 61.
Example
awplus# write