Allied Telesis AT-9000 Series - Manual (Page 927)

AT-9000 Switch Command Line User’s Guide
899
This example configures authenticator port 8 to the multi host operating
mode, so that networks users can use the port after just one user logs on:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.8
awplus(config-if)# auth host-mode multi-host
This example configures authenticator ports 12 and 13 to the multi
supplicant operating mode, which requires that all networks users on the
ports log on:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.12,port1.0.13
awplus(config-if)# auth host-mode multi-supplicant