Allied Telesis AT-9000 Series - Manual (Page 946)

Chapter 61: 802.1x Port-based Network Access Control Commands
918
NO AUTH DYNAMIC-VLAN-CREATION
Syntax
no auth dynamic-vlan-creation
Parameters
None
Mode
Port Interface mode
Description
Use this command to disable dynamic VLAN assignments of
authentication ports. For background information, refer to “Supplicant and
VLAN Associations” on page 873.
Confirmation Command
“SHOW AUTH-MAC INTERFACE” on page 923
“SHOW DOT1X INTERFACE” on page 928
Example
This example disables dynamic VLAN assignment of authenticator port
15:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.15
awplus(config-if)# no auth dynamic-vlan-creation