Allied Telesis AT-9000 Series - Manual (Page 690)

Chapter 46: MSTP Commands
662
“SPANNING-TREE MSTP ENABLE”
on page 677 Global
Configuration Designates the MSTP mode on the
switch.
“SPANNING-TREE MST
CONFIGURATION” on page 678 Global
Configuration Enters the MST Configuration mode.
“SPANNING-TREE MST INSTANCE”
on page 679 Interface
Configuration Associates an MSTI with a port.
“SPANNING-TREE MSTP ENABLE”
on page 677 Global
Configuration Designates MSTP as the active
spanning tree protocol on the switch.
“SPANNING-TREE PATH-COST” on
page 680 Port Interface Specifies the cost of a port to the root
bridge.
“SPANNING-TREE PORTFAST” on
page 681 Port Interface Designates the ports as edge ports.
“SPANNING-TREE PORTFAST
BPDU-GUARD” on page 682 Interface
Configuration Enables the Root Guard feature.
“REGION” on page 683 MST
Configuration Assigns a name to an MST region.
“REVISION” on page 684 MST
Configuration Assigns an MST revision number.
Table 68. Multiple Spanning Tree Protocol Commands (Continued)
Command Mode Description