Allied Telesis AT-9000 Series - Manual (Page 525)

AT-9000 Switch Command Line User’s Guide
497
SHOW LOG REVERSE
Syntax
show log reverse
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the event messages in the buffered log from
newest to oldest. This command and the SHOW LOG command display
the same messages, but in different order. The SHOW LOG command
displays the messages from oldest to newest. To cancel the display, type
‘q’ for quit. You cannot filter the log for specific types of messages. For an
example and description of the log, refer to Figure 95 on page 493 and
Table 52 on page 493.
Example
This command displays the event messages in the buffered log from
newest to oldest messages:
awplus# show log reverse