Allied Telesis AT-9000 Series - Manual (Page 618)

Chapter 42: STP Commands
590
“SPANNING-TREE PORTFAST
BPDU-GUARD” on page 601 Port Interface Enables the BPDU guard feature on a
port so that the switch monitors edge
ports and disables them if they receive
BPDUs.
“SPANNING-TREE PRIORITY (Bridge
Priority)” on page 602 Global
Configuration Assigns the switch a priority number.
“SPANNING-TREE Priority (Port
Priority)” on page 603 Port Interface Assigns a priority value to a port.
“SPANNING-TREE STP ENABLE” on
page 604 Global
Configuration Enables STP on the switch.
Table 62. Spanning Tree Protocol Commands (Continued)
Command Mode Description