Allied Telesis AT-9000 Series - Manual (Page 1405)

1377
Chapter 89
RADIUS and TACACS+ Client
Commands
The commands for the RADIUS and TACACS+ clients are summarized in
Table 154 and described in detail within the chapter.
Table 154. RADIUS and TACACS+ Client Commands
Command Mode Description
“AAA ACCOUNTING LOGIN” on
page 1379 Global
Configuration Configures RADIUS or TACACS+
accounting for login shell session.
“AAA AUTHENTICATION ENABLE
(TACACS+)” on page 1381 Global
Configuration Enables the TACACS+ password on
the switch.
“AAA AUTHENTICATION LOGIN” on
page 1383 Global
Configuration Enables RADIUS or TACACS+ on the
switch globally.
“IP RADIUS SOURCE-INTERFACE”
on page 1385 Global
Configuration Configures the RADIUS source IP
address interface.
“LOGIN AUTHENTICATION” on
page 1387 Console Line
and Virtual
Terminal Line Activates remote authentication for
local management sessions and
remote Telnet and SSH sessions.
“NO LOGIN AUTHENTICATION” on
page 1389 Console Line
and Virtual
Terminal Line Deactivates remote authentication for
local management sessions and
remote Telnet and SSH sessions.
“NO RADIUS-SERVER HOST” on
page 1390 Global
Configuration Deletes IP addresses of RADIUS
servers from the list of authentication
servers in the RADIUS client.
“NO TACACS-SERVER HOST” on
page 1391 Global
Configuration Deletes IP addresses of TACACS+
servers from the list of authentication
servers in the TACACS+ client.
“RADIUS-SERVER HOST” on
page 1392 Global
Configuration Adds IP addresses of RADIUS
servers to the RADIUS client for
remote authentication and accounting.
“RADIUS-SERVER KEY” on
page 1394 Global
Configuration Specifies the global encryption key of
the RADIUS servers.