Allied Telesis AT-9000 Series - Manual (Page 689)

661
Chapter 46
MSTP Commands
The MSTP commands are summarized in Table 68 and described in detail
within the chapter.
Table 68. Multiple Spanning Tree Protocol Commands
Command Mode Description
“INSTANCE MSTI-ID PRIORITY” on
page 663 Interface
Configuration Sets the port priority for an MST
instance (MSTI).
“INSTANCE MSTI-ID VLAN” on
page 665 MST
Configuration Create an MSTI instance and
associate a VLAN with it.
“NO SPANNING-TREE
ERRDISABLE-TIMEOUT ENABLE”
on page 666 Global
Configuration Deactivates the BPDU guard timer.
“NO SPANNING-TREE PORTFAST”
on page 667 Port Interface Removes ports as edge ports on the
switch.
“NO SPANNING-TREE MSTP
ENABLE” on page 668 Global
Configuration Disables MSTP on the switch.
“SHOW SPANNING-TREE” on
page 669 User Exec and
Privileged Exec Displays the MSTP settings on the
switch.
“SHOW SPANNING-TREE MST
CONFIG” on page 670 Privileged
Executive Displays the MSPT Configuration
information for a bridge.
“SHOW SPANNING-TREE MST” on
page 671 Privileged
Executive Displays the MST to VLAN port
mapping.
“SHOW SPANNING-TREE MST
INSTANCE” on page 672 Privileged
Executive Displays detailed information for a
particular instance.
“SPANNING-TREE ERRDISABLE-
TIMEOUT ENABLE” on page 673 Global
Configuration Activates the timer for the BPDU
guard feature.
“SPANNING-TREE ERRDISABLE-
TIMEOUT INTERVAL” on page 674 Global
Configuration Specifies the duration of the BPDU
guard timer.
“SPANNING-TREE GUARD ROOT”
on page 675 Port Interface Enables the Root Guard feature on a
port.
“SPANNING-TREE MODE MSTP” on
page 676 Global
Configuration Sets MSTP as the spanning tree
protocol.