Allied Telesis AT-9000 Series - Manual (Page 903)

AT-9000 Switch Command Line User’s Guide
875
Supplicant VLAN
Attributes on the
RADIUS Server
The following information must be entered as part of a supplicant’s
account on the RADIUS server when associating a supplicant to a VLAN.
 Tunnel-Type
The protocol to be used by the tunnel specified by Tunnel-Private-
Group-Id. The only supported value is VLAN (13).
 Tunnel-Medium-Type
The transport medium to be used for the tunnel specified by
Tunnel-Private-Group-Id. The only supported value is 802 (6).
 Tunnel-Private-Group-ID
The ID of the tunnel the authenticated user should use. This must
be the name of VID of the VLAN of the switch.