Allied Telesis AT-9000 Series - Manual (Page 132)

Chapter 8: Basic Switch Management Commands
104
“REBOOT” on page 124 Privileged Exec Resets the switch.
“RELOAD” on page 125 Privileged Exec Resets the switch.
“SERVICE MAXMANAGER” on
page 126 Global
Configuration Sets the maximum number of
permitted manager sessions.
“SHOW BANNER LOGIN” on
page 127 Privileged Exec Displays the banner set with the
BANNER LOGIN command.
“SHOW BAUD-RATE” on page 128 Global
Configuration Displays the settings of the Console
port.
“SHOW CLOCK” on page 129 User Exec and
Privileged Exec Displays the date and time.
“SHOW RUNNING-CONFIG” on
page 130 Privileged Exec Displays all of the settings on the
switch, including those that have not
yet been saved in the active boot
configuration file.
“SHOW SWITCH” on page 131 Privileged Exec Displays general information about
the switch.
“SHOW SYSTEM” on page 133 User Exec Displays general information about
the switch.
“SHOW SYSTEM SERIALNUMBER”
on page 134 User Exec and
Privileged Exec Displays the serial number of the
switch.
“SHOW USERS” on page 135 Privileged Exec Displays the managers who are
currently logged on the switch.
“SHOW VERSION” on page 137 User Exec and
Privileged Exec Displays the version number and build
date of the management software.
“SNMP-SERVER CONTACT” on
page 138 Global
Configuration Adds contact information to the
switch.
“SNMP-SERVER LOCATION” on
page 139 Global
Configuration Adds location information to the
switch.
“SYSTEM TERRITORY” on page 140 Global
Configuration Specifies the territory of the switch.
Table 8. Basic Switch Management Commands
Command Mode Description