Allied Telesis AT-9000 Series - Manual (Page 958)

Chapter 61: 802.1x Port-based Network Access Control Commands
930
SHOW DOT1X SUPPLICANT INTERFACE
Syntax
show dot1x supplicant interface port [brief]
Parameters
port
Specifies a port. You can enter more than one port.
[brief]
Displays an abbreviated form of this window. This is an optional
parameter.
Mode
Privileged Exec mode
Description
Use this command to display the number and types of supplicants on
authenticator ports. This command is equivalent to “SHOW AUTH-MAC
SUPPLICANT INTERFACE Command” on page 926. An example is
shown in Figure 165.
Figure 165. SHOW DOT1X SUPPLICANT INTERFACE Command
Example
This example displays the number and types of supplicants on
authenticator ports 21 to 23:
awplus> enable
awplus# show dot1x supplicant interface port1.0.21-
port1.0.23
Interface port1.0.3
authenticationMethod: dot1x
totalSupplicantNum: 0
authorizedSupplicantNum: 0
macBasedAuthenticationSupplicantNum: 0
dot1xAuthenticationSupplicantNum: 0
webBasedAuthenticationSupplicantNum: 0
otherAuthenticationSupplicantNum: 0
No supplicants