Allied Telesis AT-9000 Series - Manual (Page 943)

AT-9000 Switch Command Line User’s Guide
915
DOT1X PORT-CONTROL FORCE-UNAUTHORIZED
Syntax
dot1x port-control force-unauthorized
Parameters
None
Mode
Port Interface mode
Description
Use this command to configure the ports to the 802.1x authenticator role,
in the unauthorized state. Although the ports are in the authenticator role,
the switch blocks all authentication on the ports, which means that no
clients can log on and forward packets through them. For background
information, refer to “Operational Settings for Authenticator Ports” on
page 868.
Confirmation Command
“SHOW AUTH-MAC INTERFACE” on page 923 or “SHOW DOT1X
INTERFACE” on page 928
Example
This example sets ports 7 and 24 to the authenticator role, in the force-
unauthorized state:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.7,port1.0.24
awplus(config-if)# dot1x port-control force-unauthorized