Allied Telesis AT-9000 Series - Manual (Page 1154)

Chapter 71: RMON
1126
Overview
The RMON (Remote MONitoring) MIB is used with SNMP applications to
monitor the operations of network devices. The switch supports the four
RMON MIB groups listed here:
 Statistic group. This group is used to view port statistics remotely
with SNMP programs. For instructions, refer to “RMON Port
Statistics” on page 1127.
 History group. This group is used to collect histories of port
statistics to identify traffic trends or patterns. For instructions, refer
to “RMON Histories” on page 1129.
 Alarm group. This group is used to create alarms that trigger event
log messages or SNMP traps when statistics thresholds are
exceeded. For instructions, refer to “RMON Alarms” on page 1132.
 Event group. This group is used with alarms to define the actions
of the switch when packet statistic thresholds are crossed. For
instructions, refer to “RMON Alarms” on page 1132.
For instructions on how to configure SNMP on the switch, refer to Chapter
62, “SNMPv1 and SNMPv2c” on page 933 or Chapter 63, “SNMPv1 and
SNMPv2c Commands” on page 945.