Chapter 52, Mac address-based vlan commands, Chapter 52: mac address-based vlan commands – Allied Telesis AT-9000 Series User Manual
Page 815: Table 77. mac address-based vlan commands

787
Chapter 52
MAC Address-based VLAN Commands
The MAC address-based VLAN commands are summarized in Table 77
and described in detail within the chapter.
Table 77. MAC Address-based VLAN Commands
Command
Mode
Description
VLAN
Configuration
Deletes VLANs from the switch.
“NO VLAN MACADDRESS (Global
Configuration Mode)” on page 789
Global
Configuration
Removes MAC addresses from
VLANs.
“NO VLAN MACADDRESS (Port
Interface Mode)” on page 790
Port Interface
Removes MAC addresses from
egress ports.
“SHOW VLAN MACADDRESS” on
page 792
Privileged Exec
Displays MAC address-based VLANs.
VLAN
Configuration
Assigns names and VIDs to new
VLANs.
“VLAN SET MACADDRESS (Global
Configuration Mode)” on page 796
Global
Configuration
Adds MAC addresses to VLANs.
“VLAN SET MACADDRESS (Port
Interface Mode)” on page 798
Port Interface
Adds MAC addresses to egress ports.