Allied Telesis AT-9000 Series - Manual (Page 698)

Chapter 46: MSTP Commands
670
SHOW SPANNING-TREE MST CONFIG
Syntax
show spanning-tree mst config
Parameters
None
Mode
Privileged Executive Mode
Description
Use this command to display the MSTP configuration information for a
bridge. Use the display to check that the digest is the same on this device
as for all other devices in the same region.
Example
This example displays the MSTP configuration information for a bridge:
awplus> enable
awplus# show spanning-tree mst config
An example of the display is shown in Figure 130.
Figure 130. SHOW SPANNING-TREE MST CONFIG Command
%
% MSTP Configuration Information for bridge 0:
% -----------------------------------------------------------------
%
Format Id: 0
% Name:
% Revision Level: 0
% Digest: 0xAC36177F50283CD4B83821D8AB26DE62
% -----------------------------------------------------------------