Allied Telesis AT-9000 Series - Manual (Page 389)

361
Chapter 20
Enhanced Stacking Commands
The enhanced stacking commands are summarized in Table 36.
Table 36. Enhanced Stacking Commands
Command Mode Description
“ESTACK COMMAND-SWITCH” on
page 363 Global
Configuration Designates the switch as the
command switch.
“ESTACK RUN” on page 364 Global
Configuration Activates enhanced stacking on the
switch.
“NO ESTACK COMMAND-SWITCH”
on page 365 Global
Configuration Returns the switch to the state of
being a member switch.
“NO ESTACK RUN” on page 366 Global
Configuration Disables enhanced stacking on the
switch.
“RCOMMAND” on page 367 Global
Configuration Redirects the management session to
a different switch in the enhanced
stack.
“REBOOT ESTACK MEMBER” on
page 368 Global
Configuration Reboots member switches of an
enhanced stack from the command
switch.
“SHOW ESTACK” on page 370 Privileged Exec Displays whether the switch is a
command or member switch and
whether enhanced stacking is enabled
or disabled.
“SHOW ESTACK COMMAND-
SWITCH” on page 372 Privileged Exec Displays enhanced stacking
information about the command
switch from a member switch.
“SHOW ESTACK REMOTELIST” on
page 373 Privileged Exec Displays the switches of an enhanced
stack.
“UPLOAD CONFIG REMOTELIST” on
page 375 Global
Configuration Uploads boot configuration files from
the file system in the command switch
of an enhanced stack to the member
switches.