Allied Telesis AT-9000 Series - Manual (Page 771)

AT-9000 Switch Command Line User’s Guide
743
Disabling GVRP on the Ports
To disable GVRP on the ports, use the GVRP REGISTRATION NONE
command in the Port Interface mode. This example of the command
deactivates GVRP on ports 4 and 5:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.4-1.0.5
awplus(config-if)# gvrp registration none
For reference information, refer to “GVRP REGISTRATION” on page 755.